( Dwyer )
|
General | Series GFT Flow Totalizer is designed to be used with mass flowmeters and mass flow controllers. The totalizer accepts analogue output flow signals of either 0 to 5 VDC or 5 to 10 VDC. Series GFT integrates and accumulates up to 7 digits of direct engineering units for a given gas and flow rate (standard litres, standard cubic centimetres, etc.). Quickly connect the GFT-10 to Series GFC and GFM mass flow controllers and meters via the modular jack (replacing the LCD display) or use the GFT-10C to connect in parallel with the display. | | Features: | Input Analogue Range | 0 to 5 or 5 to 10 VDC. | Power Consumption | 10 mA @ 12 VDC, less than 0.125 Watts. | Accuracy | ±0.5% FS. | Temperature Stability | ±100 ppm/°C in the range of 5 to 50°C. | Reset | Momentary tact switch. | Display | 7-digit, 5/16˝ (8mm) H. | Power Supply | Internal lithium battery. |
|
|
|
|
Flow 
