PDFPrintE-mail
3 Phase (Trms) Power Clamp Meter-Kusam Meco-2745CLAMP ON METER-Kusam Meco-2709

AC-Power Clamp On Meter-Kusam-Meco

( Kusam Meco )
Features
DisplayVoltage Function : 6000 counts LCD display,
Power, Ohm & Hz functions : 9999 counts LCD display.
ACA clamp-on function : 4000 counts LCD display.
Update RatePower function : 2 per second nominal
Voltage, ACA clamp-on & Ohm functions : 2 per second nominal Hz function : 1 per second nominal
PolarityAutomatic
Low BatteryBelow approx 2.4V
Operating Temperature0°C to 40°C
Relative HumidityMaximum relative humidity 80% for temperature upto 31°C decreasing linearly to 50% relative humidity at 40°C
AltitudeOperating below 2000m
Storage Temperature-20°C to 60°C, < 80% R.H. (With battery removed)
Temperature Coefficientnominal 0.15x (specified accuracy) /°C
@ (0°C -18°C or 28°C - 40°C), or otherwise specified
Sensing True RMS sensing
Power supplyStandard 1.5V AAA Battery x 2.
Power ConsumptionVoltage, ACA, Hz &
Power functions : 11mA typical
Ohm function : 5.5mA typical
APO Timing Idle for 30 minutes
APO Consumption4µA typical
Dimension224(L) x 78(W) x 40(H) mm
Weightapprox. 224 gms
Jaw opening & Conductor diameter45mm max
Special featuresBacklight display, AutoVATM (Auto Selection on ACV, DCV or ACA functions); selectable Power parameters of KW, KVAR & KVA with Total Power Factor in dual-display; Total harmonic distortion THD%-F in dual-display; kWHr Recording; Display Hold; PEAK-rms HOLD; PC-Comm computer interface capabilities
AccessoriesTest leads (pair), batteries installed, user’s manual & soft carrying case
Optional AccessoriesPC interface kit
SAFETY 
 Meets IEC61010-2-032(2002), EN61010-2-032(2002), UL61010B-2-032(2003)
Measurement CategoryCATIII 600Volts AC & DC
Transient Protection6.5kV (1.2/50µs Surge)
Pollution degree2
E. M. C.Meets EN61326(1997, 1998/A1), EN61000-4-2 (1995,2000/A2), and EN61000-4-3(2002)
In an RF field of 3V/mTotal Accuracy = specified Accuracy + 50 digits Performance above 3V/m is not specified
Overload ProtectionsACA Clamp-on jaws : AC 1000A rms continuous + & COM terminals : 600VDC/VAC rms